矿产资源评价系统的地质矿产数据模型

为应用 GIS技术建立成矿区带矿产资源评价的多源地学信息系统 ,对地质矿产信息按 GIS技术上的要求 ,建立了科学、规范、实用的数据分层标准及数据纪录格式 .将地质矿产信息分成区域构造地质、固体矿床 [点 ]地质、钻孔地质等 3个大类 ,及 1 4个主题图层 ,对于主题图层中的不确定性要素通过建立基础表的方式设立了 1 7个亚图层 .制定了分层和命名规则 .在此基础上系统地编制了数据纪录格式     

先秦黄钟律管考——利用现代声学公式推测先秦黄钟律管管径的尝试

《吕氏春秋》记载的黄钟律管长度为三寸九分，而汉代后，古人普遍采纳黄钟九寸。为了研究先秦黄钟律管真实长度，对文献进行系统地考证，发现《吕氏春秋》记载的三寸九分黄钟律管应为清黄钟律管，发音当是九寸管的高八度。文献研究亦表明了先秦古人听声定律的事实，即三寸九分律管和九寸律管都为听声定律产物。由此，根据声学公式，结合文献考证，计算了黄钟律管的管径，结论为：先秦律管应是竹管，管径范围约是0．71寸。同时，考证了黄钟律管八寸十分一说和八寸七分一说，认为这两种说法都不可靠。     

二维层状钒氧化合物Co(bpy)(H2O)V2O6的水热合成和晶体结构

采用水热合成法合成了组成为Co(bpy)(H2O)V2O6(bpy=bipyridine)的钒氧化合物,并用红外光谱、元素分析和单晶X-射线衍射等手段对其进行了表征.结果表明:化合物的晶体属于正交晶系,Pca21空间群,a=0.922 3(10)nm,b=1.054 8(12)nm,c=1.439 7(16)nm,V=1.401(3)nm3,Z=4,R1=0.016 4.单晶结构解析表明,化合物具有由钒-氧锯齿链{V2O6}2nn-和n个Co(bpy)(H2O)2 单元通过氧原子共价连接而形成的二维层状结构.     

生产能力扩大的系统动态性研究

利用系统动力学的原理和建模方法描述了企业生产能力与企业物流、信息流与资金流所涉及的各种计划、生产、采购、仓储、销售及财务等职能的关系，利用因果环路图研究分析了生产能力与库存水平、交货期、市场份额、产品价格、成本、利润率、人力等多种因素的因果反馈关系，并构建了生产能力扩大的系统动力学模型来刻画其变化的复杂性与动态性，在两种市场需求（阶跃需求和泊松流随机需求）下模型的仿真结果表明，该模型能较好的反应生产能力扩大的动态行为。     

Ruin Probability with Variable Premium Rate and Disturbed by Diffusion in a Markovian Environment

We consider a risk model with a premium rate which varies with the level of free reserves. In this model, the occurrence of claims is described by a Cox process with Markov intensity process, and the influence of stochastic factors is considered by adding a diffusion process. The integro-differential equation for the ruin probability is derived by a infinitesimal method.     

DCS和FCS及其在火电厂中的应用

介绍了集散控制系统和现场总线控制系统，并对它们在火电厂中的应用做了分析。     

Newton's Easy Quadratures ``Omitted for the Sake of Brevity'

In the 1687 Principia, Newton gave a solution to the direct problem (given the orbit and center of force, find the central force) for a conic-section with a focal center of force (answer: a reciprocal square force) and for a spiral orbit with a polar center of force (answer: a reciprocal cube force). He did not, however, give solutions for the two corresponding inverse problems (given the force and center of force, find the orbit). He gave a cryptic solution to the inverse problem of a reciprocal cube force, but offered no solution for the reciprocal square force. Some take this omission as an indication that Newton could not solve the reciprocal square, for, they ask, why else would he not select this important problem? Others claim that ``it is child's play' for him, as evidenced by his 1671 catalogue of quadratures (tables of integrals). The answer to that question is obscured for all who attempt to work through Newton's published solution of the reciprocal cube force because it is done in the synthetic geometric style of the 1687 Principia rather than in the analytic algebraic style that Newton employed until 1671. In response to a request from David Gregory in 1694, however, Newton produced an analytic version of the body of the proof, but one which still had a geometric conclusion. Newton's charge is to find both ``the orbit' and ``the time in orbit.' In the determination of the dependence of the time on orbital position, t(r), Newton evaluated an integral of the form ∫dx/x <sup>n</sup> to calculate a finite algebraic equation for the area swept out as a function of the radius, but he did not write out the analytic expression for time t = t(r), even though he knew that the time t is proportional to that area. In the determination of the orbit, θ (r), Newton obtained an integral of the form ∫dx/√(1−x<sup>2</sup>) for the area that is proportional to the angle θ, an integral he had shown in his 1669 On Analysis by Infinite Equations to be equal to the arcsin(x). Since the solution must therefore contain a transcendental function, he knew that a finite algebraic solution for θ=θ(r) did not exist for ``the orbit' as it had for ``the time in orbit.' In contrast to these two solutions for the inverse cube force, however, it is not possible in the inverse square solution to generate a finite algebraic expression for either ``the orbit' or ``the time in orbit.' In fact, in Lemma 28, Newton offers a demonstration that the area of an ellipse cannot be given by a finite equation. I claim that the limitation of Lemma 28 forces Newton to reject the inverse square force as an example and to choose instead the reciprocal cube force as his example in Proposition 41. (Received August 14, 2002) Published online March 26, 2003 Communicated by G. Smith     

论法律部门的划分标准与经济法的地位

传统法律部门的划分因其片面强调客观性和按法律调整的社会关系的性质来划分法律部门而有着固有的、难以弥补的缺陷，因此要令人信服地说明经济法作为独立的部门法的地位，就必须抛弃旧的框框，按主客观一致，以主观为主导的指导思想。重新来确定法律部门的划分标准。     

两段绞接式联合收割机输送槽的设计研究

本文介绍一种适宜配置在悬挂式联合收割机上的两段铰接式输送槽设计,这种输送槽后段固定,前段与割台连接并与后输送槽铰接,该铰接点为前悬挂割台的支点,借助液压油缸升降,文中对该铰接点位置的确定,以及两段输送槽铰接处的圆弧过渡板设计进行了分析研究,提供了设计方法.     

最优化法在计算平台破损后浮态及初稳性中的应用

提出了一种用优化方法求解平台破损进水后浮态和初稳性的方法,并用所编制的计算机程序对平台破损后的浮态和初稳性进行了计算。文中给出了某一平台在下沉就位过程中的计算实例,计算结果表明:利用优化方法来求解平台破损进水后的浮态和初稳性是切实可行的.